Dimplex Convector Heater - 2kW - Timer

The Dimplex convector heater with timer has an adjustable thermostat for maintained level of warmth, plus a 24-hour timer and frost protection. For our full range of heaters click here.

• 2kW convector with timer & 2 heat settings
• Thermostat control with frost watch protection
• Supplied with all fixings for either floor standing or wall mounting
• White body with light grey trim
• Size (without feet): H 350 x W 575 x D 104mm
  Size: (with feet) H 418 x W 575 x D 196mm

The white and grey 2kW Dimplex Convector Heater with Timer has a variable thermostat so you can maintain a comfortable level of warmth, plus a 24-hour timer. The mechanical timer allows limitless fine-tuning with as many on/off periods as you like in minimum intervals of 15 minutes. A manual override switch lets you turn the heater on at any time without affecting your programmed settings.

A heat selector switch on the Dimplex 2kW Convector Heater offers a choice of low or full heat output, as an economy feature. A frost protection setting is also available on the thermostat, which is ideal for preventing frost in unheated rooms such as cellars, small storage rooms, garages, workrooms, conservatories and WCs.

For your safety, the 2kW Dimplex Convector Heater with Timer also has thermal cut-out in case the heater becomes too hot. This turns the heater off automatically, and it will only turn on again once it has sufficiently cooled.

Usable as a freestanding heater or wall-mounted, the 2kW Dimplex Convector Heater comes complete with feet and mounting brackets.

Guarantee

The 2kW Dimplex Convector Heater with Timer comes with a manufacturer’s guarantee of 3 years.

Dimensions

The dimensions of the 2kW Dimplex Convector Heater with Timer are:

• Width: 575mm
• Height (without feet): 350mm
• Height (with feet): 418mm
• Depth (without feet): 104mm
• Depth (with feet): 196mm