Eterna Downlight Converter - Polished Chrome
- Buy 10 for £8.05 £6.71 each and save 5%
The Eterna Downlight Converter lets you transform older R50, R64 and R80 or eyeball downlights into modern, low-profile fittings accepting GU10 or 12V MR16 lamps.
- Pressed Steel construction with a Polished Chrome finish. Other finish options also available
- Allows cost effective conversion to modern GU10 or low voltage MR16 12V lighting
- If converting to low voltage, a transformer will also be required. These are available to purchase separately
- Covers existing hole with diameter up to 140mm
- Supplied with ceramic GU10 and low voltage MR16 lamp holders
- Requires max 50W GU10 or 50W low voltage MR16 spotlight bulb
- Size: D 11mm x Dia 150mm
The Eterna Downlight Converter is smartly finished in polished chrome, and allows you to transform R50, R64 and R80 downlights or eyeball fittings into neat low-profile fittings with compact spotlights.
Using the included ceramic GU10 and low-voltage GU5.3 (MR16) lamp-holders and slim cover plate, the Downlight Converter will modernise your lighting scheme and make your fittings less conspicuous.
GU10 mains-powered spotlights are extremely popular and available with a variety of beam angles, colour temperatures, and using various technologies.
Low-voltage MR16 spotlights also come in many forms, and tend to emit a noticeably crisper light than mains-powered equivalents. Halogen MR16 lamps usually contain less heat in their beam than a GU10, too, dissipating much of their IR radiation through the back of the lamp (except aluminium-coated models).
Please note: low-voltage conversion requires a 12V transformer (available separately).
The Eterna Downlight Converter is available from Lyco in a selection of finishes.
The Eterna Downlight Converter has a 150mm diameter and is compatible with any existing max 140mm diameter cut-out for easy installation.
The Eterna Downlight Converter is mountable onto any normally flammable surface, including regular building surfaces such as wood, plasterboard, and masonry. It is unsuitable for use on easily flammable materials such as polystyrene or textiles.
An IP20 rating in this fitting signifies no protection against water, so it is suitable for use only in dry, indoor areas.
The Eterna Downlight Converter requires a maximum 50W GU10 or low-voltage MR16 GU5.3 spotlight bulb (available separately).
The Eterna Downlight Converter is incompatible with GZ10 lamps.
The dimensions of the Eterna Downlight Converter are:
- Diameter: 150mm
- Depth: 11mm
- Cut-out: 70-140mm
|Cutout||70 - 140mm|
|Format||Downlight Converter Plate|
|Suggested Room||Hallway, Kitchen, Office|
|No. of Bulbs||1|
|Replacement Bulb||50W Low Voltage MR16 / 50W Mains Voltage GU10|
|Text or image under product title||
2 Year Guarantee