Eterna Downlight Converter - Satin Chrome
Bulk buy - Save up to 5%
The Eterna Downlight Converter in satin nickel lets you adapt your old reflector or eyeball fitting into a neat low-profile downlight accepting either a mains GU10 or 12V MR16 spotlight.
- Pressed Steel construction with a satin nickel finish
- Allows cost effective conversion to modern GU10 or low voltage MR16 12V lighting
- If converting to low voltage, a transformer will also be required. These are available to purchase separately
- Covers existing hole with diameter up to 140mm
- Supplied with ceramic GU10 and low voltage MR16 lamp holders
- Requires max 50W GU10 or 50W low voltage MR16 spotlight bulb
- Size: D 11mm x Dia 150mm
The Eterna Satin Nickel Downlight Converter allows you to transform existing R50, R64 and R80 downlights or eyeball fittings into modern, low-profile downlights accepting GU10 or 12V MR16 spotlights.
With the included ceramic GU10 and low-voltage GU5.3 (MR16) lamp-holders, the Eterna Downlight Converter is usable with smaller, contemporary spotlights. This conversion will tidy up the look of your lighting scheme and make it less conspicuous.
GU10 mains-powered spotlights are extremely popular, and available with a variety of beam angles, colour temperatures, and in various technologies.
Low-voltage MR16 spotlights come in a diverse range of beam widths, and tend to produce a noticeably crisper light than mains equivalents. Halogen MR16 lamps usually emit less heat than a GU10, too, dissipating much of their IR radiation through the back of the lamp (except aluminium-coated models).
Please note: low-voltage conversion requires a 12V transformer (available separately).
The Eterna Downlight Converter is available from Lyco in a selection of finishes.
The Eterna Downlight Converter has a 150mm diameter and is compatible with any existing max 140mm diameter cut-out for easy installation.
The Downlight Converter is mountable onto any normally flammable surface, including regular building surfaces such as wood, plasterboard, and masonry. It is unsuitable for use on easily flammable materials such as polystyrene or textiles. An IP20 rating in this fitting signifies no protection against water, so it is suitable for use only in dry, indoor areas.
The Eterna Downlight Converter requires a maximum 50W GU10 or low-voltage MR16 GU5.3 spotlight bulb (available separately).
The Eterna Downlight Converter is incompatible with GZ10 lamps.
The dimensions of the Eterna Downlight Converter are:
- Diameter: 150mm
- Depth: 11mm
- Cut-out: 70-140mm
|Format||Downlight Converter Plate|
|Suggested Room||Kitchen, Hallway, Office|
|No. of Bulbs||1|
|Replacement Bulb||LED GU10 Bulb|
|Product Rating||4 & Up|