Eterna Downlight Converter - White
Bulk buy - Save up to 5%
The white Eterna Downlight Converter lets you adapt your R50, R64 and R80 downlight or eyeball fitting to accept modern GU10 or MR16 spotlights.
- Pressed Steel construction with a White finish
- Allows cost effective conversion to modern GU10 or low voltage MR16 12V lighting
- If converting to low voltage, a transformer will also be required. These are available to purchase separately
- Covers existing hole with diameter up to 140mm
- Supplied with ceramic GU10 and low voltage MR16 lamp holders
- Requires max 50W GU10 or 50W low voltage MR16 spotlight bulb
- Size: D 11mm x Dia 150mm. Cut out 70-140mm
The Eterna Downlight Converter allows you to easily convert existing R50, R64 and R80 downlight or eyeball fittings so they accept GU10 or low-voltage MR16 spotlights.
Supplied with ceramic GU10 and low-voltage GU5.3 (MR16) lamp-holders, the Eterna Downlight Converter is usable with either type of spotlight. One advantage in this conversion is in achieving an extremely neat, low-profile finish.
GU10 mains-powered spotlights are a popular form of lamp, available with a variety of beam angles, colour temperatures, and using various modern technologies.
Low-voltage MR16 spotlights have a very diverse range of beam widths, and tend to emit a noticeably crisper light than mains equivalents. Halogen MR16 lamps also often have a cooler beam than a GU10, dissipating much of their IR heat through the back of the lamp (except aluminium-coated models).
Please note: low-voltage conversion requires a 12V transformer (available separately).
The Eterna Downlight Converter is available from Lyco in a choice of finishes.
The Eterna Downlight Converter has a 150mm diameter and is compatible with any existing max 140mm diameter cut-out for easy installation.
The Downlight Converter is mountable onto any normally flammable surface, which includes regular building surfaces such as wood, plasterboard, and masonry. It is unsuitable for use on highly flammable materials such as polystyrene or textiles.
An IP20 rating in this fitting signifies no protection against water, so it is suitable for use only in dry, indoor areas.
The Eterna Downlight Converter requires a maximum 50W GU10 or low-voltage MR16 GU5.3 spotlight bulb (available separately).
The Eterna Downlight Converter is incompatible with GZ10 spotlights.
The dimensions of the Eterna Downlight Converter are:
- Diameter: 150mm
- Depth: 11mm
- Cut-out: 70-140mm
|Format||Downlight Converter Plate|
|Suggested Room||Kitchen, Hallway, Office|
|No. of Bulbs||1|
|Replacement Bulb||LED GU10 Bulb|
|Product Rating||4 & Up|